Tag: crochet

Knitting

Seahawks Socks

Iris Rose

I know that a lot of you regularly knit socks.  I have knit a few pairs and never enjoyed the process until I am almost finished the second one, then I love sock knitting!

I found a self striping yarn in the team colours of the Seattle Seahawks and just had to knit a pair for my DH, the ultimate Hawks fan.  The yarn is Cascade Heritage Prints in the colourway, Seattle.  I bought three skeins as I wanted to make sure that I had enough for size XXL socks which was a mistake (100g skeins, what was I thinking) as I used about a skein and a quarter but I am sure to make good use of the leftover skein and a bit.

To make the larger than standard socks, I used an old Patons’ pattern book of socks that I found in a tub of craft supplies that I inherited from my Mum.  This book actually has a couple of options for sizing men’s socks which was very helpful.  It was lovely and nostalgic reading notes that my mother wrote out to keep track of the pattern; I used the same pattern that she had used.

I started these puppies in mid-May and finally grafted the toes at the end of August, can you say procrastination?  DH was very happy with the finished socks that fit perfectly and will be well used in the coming football season!

 

It was so much fun to see how happy he was with the socks that I may just purpose the left over yarn into another pair!

#GoHawks!

Knitting

Whew, A Neckwarmer When It Is Too Hot To Think About Knitting!

Iris Rose

I don’t know what it is like where you live but here in Alberta where we are normally starting to think about fall, it is hot, hot, hot!  We have had a record heat wave this summer with little or no rain and none in sight.  I am not complaining, only commenting on the unseasonal weather.  Sorry, that’s what Canadians do isn’t it, comment on the weather in every conversation?

Even though it is hot, I always find time to knit or crochet and I have made a neck warmer or cowl to match the cable hat of two weeks ago.  I like the look of a matching set but mostly I wanted to use up the last bit of the self striping yarn that I had.  I still have a bit left so maybe some mittens will be forthcoming or maybe not.  Maybe I will liberate myself and throw that last bit of perfectly good yarn away and move on to something new!

I am still finishing the UFO pile with only, I think, four or five left.  My problem is that I keep starting new things so that resolution to finish it all never gets fulfilled.  I am sticking to working only from my stash though so one resolution is still working for me.  I am going on a yarn shop day in a couple of weeks so that will be the ultimate test of my will power.  I hear that Vegas is taking bets at 10 to 1.

Anyhow, I will keep plugging along and here, without further rambling is my neck warmer aka cowl pattern.  It is close to the neck to keep you warm and buttons to keep your hair tidy.

Cable Neck Warmer

 

This neck warmer is designed to match my Cable Hat and use up the remainder of the skein of self striping chunky yarn that I used for the hat band.  It can easily be made larger by increasing the number of cable sections and/or knitting more rows.  It can also be knit in the round if you prefer.  I made mine to button as I hate to pull anything over my head except a hat when I am on the way out the door.  I also like my cowls or neck warmers to be close to my neck but easily removed when indoors, think overheated shopping malls.  I also used a larger needle than I used on the matching hat to give a little more drape to the fabric.

Materials: Chunky yarn, 40m or 44 yds for the ribbing and 80m or 88 yds for the body.  I used Sirdar Crofter Chunky self striping for the band and Bernat Softee Chunky for the crown because that is what I had in my stash.

Tools: 6.5mm or US 10.5 needles, stitch markers to separate cable sections if you need to.

Abbreviations:          

K = knit

P = purl

C4F = slip the next two stitches to a cable needle, hold it in front of your work and knit the next two stitches on the left needle. Knit the two stitches from the cable needle.

K2tog = knit two stitches together

YO = yarn over

 

Ribbed Edge: Using the self striping yarn, cast on 80 stitches, don’t join if you are using a circular needle.

Row 1: (K2, P1) to last two stitches, K2.

Row 2: (P2, K1) to last two stitches, P2.

Row 3: Repeat Row 1.

Cut yarn leaving a tail to weave in

 

Cable Section: You will start on the wrong side of your piece.  Join contrast yarn.

Row 1: P1, (K1, P4, K1, P6), repeat six times, K1, P4, K1, P1.

Row 2: K1, (P1, C4F, P1, K6), repeat six times, P1, C4F, P1, K1.

Row 3: Repeat Row 1.

Row 4: K1, (P1, K4, P1, K6), repeat six times, P1, K4, P1, K1.

Rows 5 to 20: Repeat Rows 1 to 4 four more times.

Row 21: Repeat Row 1.

Cut yarn leaving a tail to weave in.

 

Ribbed Edge: You will start on the right side of your piece.  Join in self striping yarn.

Row 1: (K2, P1) to last two stitches, K2.

Row 2: (P2, K1) to last two stitches, P2.

Row 3: Repeat Row 1.

Cast off loosely knitwise on the wrong side.

Ribbed Ends:

Button hole side:

With self striping yarn, pick up and knit 20 stitches along one end with the right side facing you.

Row 1: wrong side, (P2, K1) six times, P2.

Row 2: K2, P1, (YO, K2tog, P1, K2, P1) twice, YO, K2tog, P1, K2.  Three buttonholes made.

Row 3: Repeat Row 1.

Row 4: (K2, P1), six times, K2.

Row 5: Repeat Row 1.

Cast off purlwise.

Plain Side:

With self striping yarn, pick up and knit 20 stitches along one end with the right side facing you.

Row 1: wrong side, (P2, K1) six times, P2.

Row 2: (K2, P1), six times, K2.

Repeat Rows 1 and two once more and then Row 1 again.  Cast off purlwise.

Block your neck warmer and weave in the ends.  Sew buttons on the plain side to line up with the buttonholes on the other side.  I sewed a couple of buttons on the hat band to match the neck warmer making a set.

 

Knitting

Knitting Machine Rehab

Iris Rose

I have spent the last couple of weekends rehabbing two of my knitting machines.  I have been machine knitting along with hand knitting and crocheting since the late 1980’s (yes, I really am that old) and had put my machines away in 2004 when we moved and spent the next few years living in a fifth wheel trailer and travelling, which is a story for another post.

I have four Singer knitting machines, two acquired recently.  Three are standard gauge and one is bulky gauge.  When we eventually settled here in Calgary and I set up my craft space, I had room for only one machine and chose the standard gauge Singer 560 to leave out permanently.  It seemed the best choice as it knits a finer yarn than I would normally choose to hand knit and has a lace carriage and ribber as well.

As I said, I set it up with my craft space but, with the ordinary busyness of life, it languished under a sheet, unused and lonely.  I joined a facebook group for machine knitters and found my mojo again this spring.

My very pretty wrap made on a standard gauge machine, Singer SK560

Like any piece of machinery, being idle is not good for a knitting machine.  The needle retaining sponge was flat as a pancake and the needles, which I had reused from another machine after straightening them all out which is never a good idea, really needed to be replaced.  The cheapskate in me is the one who straightened them out; I had no part in them being bent in the first place.  I bit the bullet, after a frustrating and stitch dropping trial at making a wrap that I found posted in a YouTube video, and bought a new sponge strip and needles.  The wrap turned out lovely by the way.  The stitches were all picked up and spaced correctly, whew!

Machine knit earflap hats!

Anyway, back to the rehab, all of the needles came out and I thoroughly cleaned the bed and rail and installed new needles.  We scraped out the old sponge and replaced it with new and the machine now knits beautifully.  It is amazing how much lint was trapped in all of the nooks and crannies!

While I was on a roll, I thought about my bulky machine and how much I liked using it in the past for big areas of plain stocking stitch.  I pulled it out and cleaned it this last weekend.  The needles were all in excellent shape and only needed to be cleaned with a good alcohol soak and a wipe down.  My fingers are now grey with old grease.  I guess I should have hauled it out sooner!  I replaced the sponge on the needle retainer bar and the machine looks like new.

I have a matching ribber for this machine and thought about setting the two up together on another table to use.  I pulled out the ribber and, much to my dismay, found it had been broken during one of the moves that we made.  Both of the plastic end caps are snapped and the bracket for the pitch leaver is smashed.  I have looked on line and cannot find any parts available as these machines were manufactured in the 80’s and 90’s.  I really don’t know what I can do to replace the plastic pieces, maybe 3D printing?  The ribber is usable but I don’t know for how long.  If I took a picture of myself when I found the damage you would have seen me crying.

I am going to start up again with machine knitting and will show you some of my work and post some patterns here as they are developed. 

I am also working on a crocheted shawl pattern that I have been designing in my head for a while.  It is time to actually make it and develop the pattern for you.

Knitting

The 3F’s of Project Mangement

Iris Rose

Every couple of months (okay six months, okay, okay, every year or two) I find myself surrounded by unfinished projects that I have started, in some cases, who knows why, and really have the urge to clean up.  This usually happens when I can’t find a single available 5mm needle when I know that I have several or when I can’t see my table top.  Sometimes the avalanche when I open the closet door is an incentive as well.

When any of these things happen, and sometimes all of them happen at once, I have a 3F day or maybe two days, okay a week.  Finish, frog, or fro out.  I know that fro is not used this way but I like the rhyme.  It also reminds me of two year olds cleaning up and right before the tantrum which describes me to a tee on 3F day.

Finish is, of course, the best action for an almost complete project.  Projects do not go in the finish pile if: they are ugly and will never fit anyone and that’s why they are not finished, they are so old that the style has already come and gone a second time so waiting another forty years is just foolish, or I just plain hate working with the yarn in question.  Anything that is not in one of the categories above is placed into a bin.  Every time I want to start a new project (which is every minute of every day) I force myself to finish one from the bin.  This method works most of time although once in a while I change the finish status of the UFO to frog just so that I can start something new!  The only one who really cares is me and I like crafting too much to work on something I hate.

Frog is next on the to do list.  All of the projects that I can’t bring myself to finish are set aside so that I can rip out, rewind and reuse the yarn.  This goes for the too old if the yarn is still nice, the ugly and will never fit anyone, again if the yarn is still nice and the I hate working with the yarn if it is because the yarn didn’t suit the pattern.  Maybe it just needs a larger or smaller needle or hook or to be paired with a contrast to dilute the impact.  I usually set aside an evening or two to accomplish restashing these never to be finished projects.

Fro is a hard one.  I, like any yarnie worth their salt, hate to throw away “good yarn” but have learned the hard way (remember I mentioned an avalanche?) that you just can’t keep everything.  Try throwing away a truly unlikeable project that you know you will never finish made with yarn that you will never like.  It is freeing in a way that you can’t imagine!  I have reached the point now where, when I look through my stash and wonder why I ever kept all of those ten metre or less pieces or even those part skeins of so-so yarn, I can gather them up and put them in the garbage can.  Yes, (and I can hear the response to wasting yarn) it is great to donate to charity groups but, if the yarn is too old or really awful to work with, why inflict it on someone else to work with or wear.

Get over the guilt and try your own purge and you will find that you may have some really lovely finished things, some really lovely recycled yarn and a great big space where all of the uglies lived!

New pattern alert: I have published a paid cardigan pattern on Ravelry this week.  It is lace and stocking stitch in multiple sizes.  Have a look!   http://www.ravelry.com/patterns/library/roses-and-lace-cardigan

Knitting

Knit and Sewn Dress for a Little Girl

Iris Rose

I love these little dresses.  The skirt is full and fun and the bodice is a cozy knit.  I have seen dresses similar to this on Pinterest but have been unable to find a pattern that works for me.

When you can’t find a pattern, what do you do?  You write one of your own of course!

I love to crochet and sew as well as knit so have combined all of these crafts in this little dress.  I have a really soft cotton and acrylic blend worsted weight yarn in my stash (don’t get me started on ebay and my affair with the same a couple of years ago) and thought that it would make a pretty top for the dress that I had in mind.

The skirt is the bottom of a new lady’s skirt that I found on a clearance rack for a couple of bucks and bought with the idea of repurposing the fabric.  Remember, I am the Queen of Clearance!  I cut it off to the right length, already hemmed and gathered it to fit the bottom edge of the bodice.

I found buttons in my collection that matched and voila, done!

Here is the pattern as I made it.  I have included four sizes for you.

Child’s Dress Bodice

This dress bodice pattern is designed to attach to a sewn skirt to make a pretty and comfortable dress for your sweetie.  The bodice is knit top down with worsted weight yarn and is a really easy knit.  You can customize the top by making it longer or shorter or even turning this basic pattern into a cardigan by omitting the skirt, making it hip length, and finishing the bottom with the pretty edging.

Sizes: 2, (4, 6, 8)

Materials: Worsted weight yarn, I used a cotton and acrylic blend, 150m (165 yards) to 280m (310 yards), 4, (5, 6, 6) buttons. Fabric for the dress skirt, 115cm (45”) wide and the desired length of the skirt plus 6cm (2.25”) for the hem and gathers.

Tools: 5.5mm (US 9), 80cm (32”) circular needle, 5mm (US 8 or H) crochet hook for optional edging, 6 stitch markers, tapestry needle.

Gauge: 16 stitches x 24 rows = 10cm or 4”

Cast on 66, (72, 80, 88) stitches.

Rows 1 to 3: Knit 3 rows, next row is right side and you will divide for the fronts, back and sleeves placing markers as you go.

Note 1: The first four stitches on every row are knit to make the bands.  Buttonholes are worked starting on the fourth row and on every twelfth row after that.  You will make three on size 2, four on size 4, and 5 on size 6 and 8.  The extra button is sewn on through both layers after the fronts are joined to balance the functioning buttons.

Note 2: All yarn overs are purled or knit through the back loop on the wrong side rows.  This will give you a smaller buttonhole and a smaller increase hole at the sleeve/body joins.  If you wish to you can, of course, work them as usual but your holes will be significantly larger.  You will need larger buttons.

Row 4: Right side of work.  K4, place marker, K8, (9, 11, 12), YO, place marker, K1, YO, K10, (11, 12, 13), YO, place marker, K1, YO, K19, (21, 23, 27), YO, place marker, K1, YO, K10, (11, 12, 13), YO, place marker, K1, YO, K7, (8, 9, 11, ), place marker, K2tog, YO, K2 (buttonhole made).

Row 5 and all wrong side rows: K4, slip marker, P across slipping markers as you go to last marker, slip marker, K4.

Rows 6 to 14: K4, slip marker, K to next marker, YO, slip marker, K1, YO, K to next marker, YO, slip marker, K to next marker, YO, slip marker, K1, YO, K to next marker, YO, slip marker, K1, YO, K to next marker, slip marker, K4.

Row 16: K4, K to next marker, YO, slip marker, K1, YO, K to next marker, YO, slip marker, K to next marker, YO, slip marker, K1, YO, K to next marker, YO, slip marker, K1, YO, K1 to next marker, slip marker, K2tog, YO, K2 (buttonhole made).

Continue working increases as in Row 6, make a buttonhole on every twelfth row on the right front band.

Size 2: Stop when you are finished Row 25 (wrong side).  You should have 4 bands stitches, 19 front left stitches, 33 left sleeve stitches, 42 back stitches, 33 right sleeve stitches, 19 right front stitches, and 4 band stitches.  Move to the transition row.

Size 4: Stop when you are finished Row 31 (wrong side).  You should have 4 bands stitches, 23 front left stitches, 40 left sleeve stitches, 50 back stitches, 40 right sleeve stitches, 23 right front stitches, and 4 band stitches.  Move to the transition row.

Size 6: Stop when you are finished Row 35 (wrong side).  You should have 4 bands stitches, 25 front left stitches, 44 left sleeve stitches, 56 back stitches, 44 right sleeve stitches, 25 right front stitches, and 4 band stitches.  Move to the transition row.

Size 8: Stop when you are finished Row 39 (wrong side).  You should have 4 bands stitches, 30 front left stitches, 50 left sleeve stitches, 64 back stitches, 50 right sleeve stitches, 30 right front stitches, and 4 band stitches.  Move to the transition row.

You will need to have a separate end of your yarn to finish the sleeves, one at a time, so that you don’t need to cut your main working yarn.  You can use the other end of your working ball or start a new one.  You can cut if you choose but it will mean more ends to weave in!

Transition Row: Sleeves will be finished and front and back of body joined. K4, slip marker, K across the left front to next marker, drop your working yarn and, with a new end of yarn, K 4 rows back and forth (garter stitch) on left sleeve stitches only, removing markers after the first row.  Cast off sleeves stitches on right side.  Pick up your working yarn, turn your work around and cast on three stitches at the end of the last stitch.  Turn the work back and K across the back to the next marker, drop your working yarn and, with a new end of yarn, K 4 rows back and forth (garter stitch) on right sleeve stitches only, removing markers after the first row.  Cast off sleeves stitches on right side.  Pick up your working yarn, turn your work around and cast on three stitches at the end of the last stitch.  Turn the work back and K across the right front to the next marker, slip marker K4.

Work back and forth on the body only from here.

Row 1: K4, slip marker, P to next marker, slip marker, K4.

Row 2: K4, slip marker, K to next marker, slip marker, K4.

Size 2: Repeat Rows 1 and 2 twice more and then repeat Row 1 once for a total of 8 rows on the body section.  Cast off on right side.

Size 4: Repeat Rows 1 and 2 four more times and then repeat Row 1 once for a total of 12 rows on the body section.  Cast off on right side.

Size 6: Repeat Rows 1 and 2 six more times and then repeat Row 1 once for a total of 16 rows on the body section.  Cast off on right side.

Size 8: Repeat Rows 1 and 2 eight more and then repeat Row 1 once for a total of 20 rows on the body section.  Cast off on right side.

Overlap the front bands and stitch together at the bottom.  Sew sleeve edges together and stitch to cast on stitches under the arm on the body.  Weave in ends.  Sew on buttons on the left front band to match buttonholes on the right.  Sew the extra button near the bottom of the overlapped bands at the same spacing as the buttonholes.

The bottom may be left plain, edged with purchased lace or finished with a crocheted edging like the sample.

Crocheted edging: The trim is based on a seven stitch repeat.

Rnd 1: Starting at either side, join yarn, ch 1 and work 84, (91, 98, 105) sc over the cast off stitches at the bottom edge.  Join with a slip stitch.

Rnd 2: Ch3, skip 3 sc, slip st into 4th sc, skip next 2 sc, (dc, ch1) 4 times, dc in same sc, repeat to around. After last slip st, (dc, ch1) four times at starting ch3 and join with slip st to second ch of ch3.

Rnd 3: (Slip st into first ch1 space of next shell, ch2, slip st in same space, slip st in next ch1 space, ch2, slip st in same space three more times).  Repeat around, join with slip stitch into first slip st and fasten off.

Weave in your ends and block your dress bodice.

Unblocked, ready to finish

Skirt: Cut two pieces of fabric each 58cm (22.5”) wide and the length that you want the skirt to be (anywhere from 20cm (8”) to 50cm (20”) to fit your little one) plus 6cm (2.25”) for the hem and gathered seam allowance.

Finish cut edges with an overcast stitch or serge to stop fraying.

Sew side seams.

Run a gathering thread around the top edge and gather to fit the bottom edge of the bodice.

Stitch the bodice bottom edge to the skirt by lapping the top over the gathered edge and stitching with a matching thread by machine or hand.

Turn up a 4cm (1.5”) hem and stitch with a hem stitch.