Day: February 14, 2017

Have you ever done a CAL or KAL.  I haven’t but am taking the plunge this week with the “Hygge” shawl CAL from Scheepjes yarn. 

Robyn posted on my facebook page for me while I was away and one of her posts highlighted this lovely project.  It is a crocheted wrap that is embellished with embroidery and is so pretty and is designed by Kirsten Ballering of Haak Maar Raak.  Although I have done the tension swatch, I haven’t done the embroidery sample yet but I can’t wait to get started on the wrap itself! 

I will be posting about my reaction to the pattern and my WIP on my facebook page, Iris Rose Knits and Crochets.  If you haven’t had a look yet, please do and a big thanks to everyone who has liked my page. 

I haven’t had much time for designing lately but finally have finished putting the pattern together for my latest scarf and hat set knit in Lion Brand Scarfie.  It is a very soft eyelet and twisted stitch pattern that runs lengthwise on the scarf and around the hat.  A very easy pattern to do with a little practice on the twisted stitches, the set will use just over two skeins of Scarfie.  You will have enough left over for a pair of mitts as well.

Twisted Stitches Scarf and Hat

I took advantage of the long and gradual colour changes of Scarfie yarn to make this scarf and hat set.  You could use any worsted weight yarn to make your own set in colours that suit you.  The knitting is easy with enough changes in the pattern to keep it interesting.

 

Size: Scarf is 21cm x 164cm or 8.25” x 64” and the hat is 50cm to 60cm or 20” to 24”.

Tools: a 6.5mm or US 10.5 circular needle, 60cm or 24” or longer for the scarf to hold all stitches, a 6.00mm or US 10 circular needle, 32cm or 16” for knitting the hat in the round or a set of DPN’s in the same size, two stitch markers, a tapestry needle for weaving in the ends.

Materials: Lion Brand Scarfie or equivalent weight yarn, 335m or 370 yds.  The ball band shows this to be a 5 or bulky yarn.

 

Seed Stitch: Row 1: Knit 1, purl 1 over an even number of stitches.

                      Row 2: Purl 1, knit 1.

Stocking Stitch: Right side: knit all stitches

                            Wrong side: purl all stitches

Twisted Stitches: Knit into the back of the second stitch on the left hand needle, leave it on the needle and knit into the front of the first stitch on the left hand needle.  Slide the two stitches off to the right hand needle together.  You will use this stitch pattern throughout the scarf and hat and, as it feels a little awkward if you have never done this stitch before, a little practice is worth the time before you start.

Abbreviations:        K = knit

                                    P = purl

                                    K2Tog = knit 2 stitches together

                                    P2Tog = purl 2 stitches together

                                    YO = yarn over

Scarf:

With 6.5, US 10.5 needle, cast on 202 stitches.  You can make the scarf longer or shorter by casting on more or less stitches in even numbers but remember you will need more yarn.  You can make the scarf wider by increasing the number of pattern repeats.

Note: Odd numbered rows are right side rows.

Rows 1 to 4: Work 4 rows of seed stitch.

Row 5: Work first four stitches in seed stitch, place marker, working stocking stitch to last four stitches, place marker, work last four stitches in seed stitch.

Rows 6 to 8: Work first four stitches in seed stitch, slip marker, working stocking stitch to last four stitches, slip marker, work last four stitches in seed stitch.

Row 9: Work first four stitches in seed stitch, slip marker, work twisted stitches to the next marker, slip marker, work last four stitches in seed stitch.

Rows 10 and 11: Work first four stitches in seed stitch, place marker, working stocking stitch to last four stitches, place marker, work last four stitches in seed stitch.

Row 12: Work first four stitches in seed stitch, slip marker, P3, *(YO, P2Tog, P2)*. Repeat * to * to last three stitches before marker, work YO, P2Tog, P1, slip marker, work the last four stitches in seed stitch.

Rows 13 and 14: Work first four stitches in seed stitch, place marker, working stocking stitch to last four stitches, place marker, work last four stitches in seed stitch.

Rows 9 to 14 form the pattern for the body of the scarf.  Work rows 9 to 14 three more times for a total of four repeats of the pattern.

Row 33: Work first four stitches in seed stitch, slip marker, work twisted stitches to the next marker, slip marker, work last four stitches in seed stitch.

Rows 34 to 37: Work first four stitches in seed stitch, slip marker, working stocking stitch to last four stitches, slip marker, work last four stitches in seed stitch.

Rows 38 to 41: Work 4 rows of seed stitch.

You will end on the purl or wrong side but you will need to cast off loosely knitwise for a neat edge.

Block your scarf and weave in the ends.

 

Hat:

With 6mm, US 10 circular needle or DPN’s, cast on 84 stitches and, taking care not to twist the stitches, join for knitting in the round. Place a marker at the join to mark the join and slip it at the start of each round.

Rounds 1 to 12: Work K2, P2 ribbing.

Rounds 13 to 16: Knit all stitches.

Round 17: Work a round of twisted stitches.

Round 18 and 19: Knit.

Round 20: K2, *(YO, K2Tog, K2)* repeat around to last two stitches, K2Tog.

Round 21 and 22: Knit.

Repeat rounds 17 to 22 three more times.

Round 41: Work a round of twisted stitches.

Rounds 42: begin decrease, *(K12, K2Tog)* repeat * to * around. 78 st

Round 43: Knit.

Round 44: *(k11, K2Tog)* repeat * to * around. 72 st.

Round 45: Knit.

Round 46: *(Knit 10, K2Tog)* repeat * to * around. 66 st.

Repeat Rounds 41 to 46 three more times, decreasing with one less in the count (i.e.: Knit 9 on the next decrease round, next Knit 8, etc.), to end up with 12 stitches.  Cut an long end and take off the remaining stitches with a tapestry needle.  Pull the top of the hat closed and fasten off on the inside.

Weave in your ends and lightly block the hat without blocking the ribbing.

 

 

Did you ever make a sweater that you were absolutely in love with, both the yarn and the pattern and, when you were sewing it together, discovered a mistake so enormous that you could not ignore it?

I knit myself a really lovely cardigan in a beautiful yarn this last couple of weeks.  I joined the shoulders with a three needle bind off, knit the band around the front and neck and sewed in the sleeves.  I pinned the sides together for seaming and, much to my great distress and using every curse word that I know, I found that I had repeated the first lace pattern at the beginning (bottom) of the back piece twice and only once on the fronts.  I got ready to toss it into the garbage or at least a corner to gather dust but I just liked it too much to not try to repair it.

I have removed the bottom of a sweater before and reknit it down to increase the length but only in stocking stitch and never with this pretty a yarn.  I gathered my courage and here’s what I did.  I left the sweater sewn as far as I had gone because who wants to undo hand sewn sweater seams.  That almost never works out for me.

I used a contrast colour in a pale yellow so that I could still see it but not have any bright or dark fibres left when I removed it and, picking up one side of every stitch, threaded a life line through my knit stitches two rows above the last lace repeat that I wanted to keep.  I then place two life lines one row apart on the two rows below the first row of garter stitch that bordered the lace pattern.

Next, I took a very deep breath and cut between the life lines.  Yes, I cut the bottom of the back off.  Working on the bottom piece, I picked out all of the little bits from cutting and, carefully ripped back to a couple of rows above my life line.  I picked up the stitches with a circular needle, made sure that my count was correct and unknit back to the last knit row that ended the one lace repeat that I should have stopped at the first time around.  I used a contrast waste yarn and worked two rows in stocking stitch then cast off to hold all of the stitches securely.

Putting that piece aside, I then used my circular needle and picked up one side of the bottom loop of each stitch between the two life lines on the top piece of the back.  I used two life lines here as I wasn’t sure how the loops would hold when I picked up the bottom of each stitch.  I then ripped back to the needle, used waste yarn and worked the same two rows of stocking stitch and cast off.

Now, to put the two pieces back together, I worked from the wrong side with a really long length of yarn (because I didn’t want to have to try to join in the middle) and grafted the loops from the bottom to the loops from the top piece.  I checked to make sure that all of the stitches were included and ripped out the waste yarn from both pieces.

Success!  My lovely sweater knit with the lovely yarn was now repaired and the fronts matched the back.